|
 |
|
XL14B 2000 D.B.C. XL Hollow Spindle Oil Country Lathe
1-014-200
« back
|
Product details |
|
|
- Heavy Duty and sturdy machine is rated for continuous use and will give you longer life expectancy.
- Headstock spindle is supported by high precision bearings giving you the accuracy and repeatability.
- Headstock gears are made of high quality alloy steel, hardened and precision ground to provide smoother running, better surface finish on machined components. Hardness provides wear resistance and gears have many years of life expectancy.
- High speeds of machine allow you to do your work faster and increase your profitability. This is achived through robust construction of headstock.
- Gap-bed: A generous gap bed lets you swing large components with ease.
- Hardened and ground V guideways provide you with accuracy, rigidity and long working life.
- large spindle hole is specially ideal for large diameter pipework.
- Outboard steadies provide support and safety for long components.
- Universal gearbox enable to cut a large range of metric and imperial threads without the need of changing any individual gears. All this is achieved simply by shifting gear levers.
- Magnetic switch provides thermal overload protection and constantly safety monitoring relays.
- Sigma type clutch & brake for controlled operation.
- Safety device to prevent simultaneous engagement of feed and screw cutting levers which safeguards against any damage to the system.
- Multistart screw cutting facility enables you to cut multistart threads with ease and precision.
- Foot stop for safety and precision.
|
|
Specifications |
| Distance between centres mm DBC | 1500 | | DP | 240-1/2 | | Height | 1660 | | Height of centres | 400 | | Inch | 60-1/8 | | Length | 4235 | | Metric | 0.5-240 | | Model | XL14B 2000 D.B.C. | | Module | 0.125-60 | | Motor HP | 25 | | Motor kW | 18.5 | | No of spindle speeds | 18 | | Number of feeds | 72 | | Number of threads | 72 each type | | Range of cross feeds | 0.06-31mm/rev | | Range of longitudinal feeds | 0.13-62mm/rev | | Range of spindle speeds | 6-315 | | Spindle bore mm | 356 | | Swing over bed mm | 800 | | Swing over cross slides mm | 540 | | Swing over gap mm | 1050 | | Taper of tailstock quill | 6MT | | Travel of compound slide | 160 | | Travel of cross slides | 420 | | Travel of tailstock quill | 280 | | Weight | 6700 Kgs | | Width | 1400 | | Width of bed | 540 |
|
|
